Acousti-Board
RSIC-DC04X2™
Low Profile Wall Systems
RSIC-DC04X2 Resilient Sound Isolation Decouple Clip
The RSIC-DC04X2™ low profile wall system has been developed to provide a low profile, high performance, noise control system. The RSIC-DC04™ or the RSIC-DC04X2™ are used to support the studs in a wall or joists in a ceiling system.
These systems are adjustable to allow for a low profile (1/2″ to 2″) separation. The RSIC-DC04™ and RSIC-DC04X2™ clips are designed to support additional studs (in walls), or joists (in ceilings) separate from the structural framing members.
Product Applications:
Note: The RSIC-DC04™ and RSIC-DC04X2™ are not designed to carry structural loads. The RSIC-DC04™ and RSIC-DC04x2™ are intended to support the loads of gypsum board and uniform loads only. Focused loads and point loads must be engineered by a licensed professional.
RSIC-DC04™ Low Profile Wall System (Standard Duty)
The RSIC-DC04™ Low Profile Wall System Standard Duty consists of two RSIC- DC04™ clips supporting the bottom of each Stud, and one RSIC-DC04™ supporting the top of each stud.
RSIC-DC04™ Low Profile Wall System (Heavy Duty)
The RSIC-DC04™ Low Profile Wall System Heavy Duty consists of two RSIC-DC04™ clips supporting the bottom of each Stud, and two RSIC-DC04™ supporting the top of each stud.
RSIC-DC04™ Low Profile Wall System (Standard Duty) RSIC-DC04X2™ Design
The RSIC-DC04X2™ Low Profile Wall System Standard Duty consists of one RSIC-DC04X2™ clips supporting the bottom of each Stud, and one RSIC-DC04™ supporting the top of each stud.
RSIC-DC04™ Low Profile Wall System(Heavy Duty) RSICDC04x2™ Design
The RSIC-DC04X2™ Low Profile Wall System Heavy Duty consists of one RSIC-DC04X2™ clips supporting the bottom of each Stud, and one RSIC-DC04X2™ supporting the top of each stud.
