Print Page

Coat of Silence™

Soundproof paint by Acoustical Surfaces. Coat of Silence™ Sound Reducing Paint System Coat of Silence™ Sound Reducing Paint System

Spray-On Sound Reducing Coating

Introducing Coat of Silence – the easy to use, spray on sound deadening coating for all your interior sound reduction projects.

  • As Simple as Applying Paint
  • One Person Process
  • Consistency in Performance
  • High Degree of Sound Reduction
  • Reduce Noise Transmission
  • Cost Effective
  • Mold, Mildew and Water-Resistant
  • Class A Fire Retardant

Product Testing & Information


Coat of Silence soundproof paint is applied using a 2-step application process of two layers of “resilient” base coat followed by a “mass building” finish coat. By increasing mass, Coat of Silence sound absorption paint reduces sound transmission through walls and ceilings. The Coat of Silence base coat layer retains resiliency over time and the durable finish coat is ready for the paint or wall covering of your choice.

Coat of Silence soundproof paint brings a 2-step system that can be sprayed onto any existing surface or with new construction. This sound absorption paint is a new proven soundproofing solution that keeps the noise out as well as the cost and labor down. Applications include hospitals, hotels, schools, condos, apartments, home media rooms, offices, retail centers, construction, and many more.

View Frequently Asked Questions

Soundproof Paint acoustical performance and noise reduction properties.

Product Specs

STC RATING

Sound deadening spray can increase room/partition by 3-7 points depending on room construction and application methods.

COLOR

White

DENSITY

Base Coat – 9.45 ± 0.2 lbs/gal
Finish Coat – 9.85 ± 0.2 lbs/gal

DRY CONTENT

Base Coat TNV – 64.28% (62 ± 2)
Finish Coat TNV: – 61.61% (62 ± 2)

CLEANING & DILUTION

Water

APPLICATION

Sprayed

APPLY TEMPERATURE

Between 50°F and 90°F

SPRAY NOZZLE SPECIFICATIONS

A 317 tip is recommended

COVERAGE

Base Coat – One gallon covers approximately 100 sq ft at two coats
Finish Coat – One gallon covers approximately 100 sq ft at two coats

Example: A job requiring 500 sq ft of coverage would require 10 gallons of product; 5 Base Coat and 5 Finish Coat.

LENGTH OF STORAGE

Original, unopened containers may be stored up to 12 months. Open, unused material should be disposed of after a 6-month period.

FLAMMABILITY

Flame Spread: 15; Smoke Developed: 10

Easy To Use

The Coat of Silence sound reduction system is applied using a 2-step application process of 2 layers of “resilient” Base Coat followed by 2 layers of “mass building” Finish Coat to reach an ideal thickness of 25-35 mils. We recommend only those with commercial/airless spray application experience, or painting/coatings professional, attempt to apply this product.

spraying-acoustical-paint

Step One

After priming your surface, two coats of Base Coat sound insulation spray is recommended for best sound reduction results.

  • Because of the sound dampening paint’s thickness, stir thoroughly with drill or paddle.
  • Because a membrane is created, spray an ample coat without running.
  • To effectively achieve thickness of product, do a vertical and horizontal pass for each layer.
  • For best performance, wait 20-40 minutes between layers, or until product is dry.

Step Two

Two coats of this sound-absorbing paint’s Finish Coat are recommended for best performance.

It can be painted over by any kind of paint, including latex & enamel.

  • Because of product thickness, stir thoroughly with drill or paddle.
  • Apply an even coat to ensure a consistent finished surface.
  • To effectively achieve thickness of product, do a vertical and horizontal pass for each layer.
  • For best performance, wait 20-40 minutes between layers, or until product is dry.

Application

An airless sprayer with a 317 tip and 1,800 to 2,400 psi is recommended. Be sure to clean the sprayer using soap and water within 30 minutes (after last use) or the material will begin to set inside the sprayer.

Please note: the dampening ability of the material is not affected by soundproofing paint application method.

Clean Up

Clean up can be done with soap and warm water.

Significant Sound Reduction

With the Coat of Silence 2-coat process, mid-range sounds become contained. Common noise is greatly reduced. We have reached an industry high – even the test labs were a buzz. To date, no other sound reduction solution can deliver with the consistency of Coat of Silence. Manufactured at the same high quality as major paint manufacturers.

Our patent-pending Coat of Silence resilient layer (Base Coat) is scientifically formulated to increase the STC rating of a room/partition by 3-7 points depending on the room construction and application methods. The Base Coat forms nano membranes that create sound absorbing and sound deflecting barriers. Our Finish Coat has the same sound deflecting formula to complete the sound reduction system.

No other sound reduction process offers such results with so little work. It’s tested in accordance with ASTM E90-09 and E413-04 as well as UL tested. Underwriter Laboratory has been testing products and helping to define standards for more than 75 years and they evaluate more than 19,000 types of products, components, materials and systems a year. With these testing standards, you know Coat of Silence silences the competition, as well as the room.

Coat of Silence – Improvement of One Side Coated Wall to Attenuate Sound
Frequency (Hz) Uncoated Wall One Side Coated Wall Improvement of Two Side Coated Wall Improvement of
125 20.6 23.3 2.7 23.4 2.8
3150 38.1 40.7 2.6 43.4 5.3
4000 41.9 44.4 2.5 46.9 5.0
5000 48.8 51.5 2.7 54.1 5.3
6300 53.3 55.5 2.2 58.2 4.9
5000 59.4 61.7 2.3 64.3 4.9

Coat of Silence Evaluation Graph