Looking for high frequency vibration mounts? The ND Neoprene Mounts are ideal for noise prevention. When you place neoprene isolators under equipment they run quieter and more reliably with less wear. Many times the noise control problem isn’t the walls, ceiling or floors. It’s the equipment.
ND Neoprene Mounts are designed for both high static deflections and simplified installation. The rubber is loaded in both shear and compression to provide rubber in shear performance as well as overload protection. They are one piece molded assemblies with skid resistant rubber ridged base plates and circular rubber ridged tops. The complete neoprene covering of the metal parts provides corrosion protection in either humid indoor or outdoor service.
Use double deflection neoprene mounts to isolate equipment having slowest rotational component speeds above 1200 RPM that are located in non-critical areas. When equipment is located on wide vibration sensitive spans, higher deflection spring isolators are generally required to cancel the effect of the floor span’s deflection.
Bolting is not necessary on most installations. When the equipment has a flush drain pan or tank on the bottom, mounts can be inverted as shown so the base plate provides support over a larger area.
ND Mounts perform best when placed under equipment located on ground support concrete slabs, above stiff support walls and columns and rigid upper building spans.
ND Double Deflection Neoprene Mounts
Type & Size
Max Rated Capacity
Max Rated Deflection
Hardness (Durometer)
Dimensions
H
L
W
BC
TH
ND-A-Black
45 lbs
0.35″
30
1-1/2″
3-3/16″
1-5/8″
2-3/8″
5/16-18 × 3/4″
ND-A-Green
75 lbs
40
ND-A-Red
125 lbs
50
ND-B-Black
100 lbs
0.40″
30
1-7/8″
3-7/8″
2-5/16″
3″
3/8-16 × 1″
ND-B-Green
150 lbs
40
ND-B-Red
235 lbs
50
ND-B-White
380 lbs
60
ND-B-Yellow
600 lbs
70
ND-C-Green
260 lbs
0.50″
40
2-3/4″
5-1/2″
3-5/16″
4-1/8″
1/2-13 × 1″
ND-C-Red
400 lbs
50
ND-C-White
600 lbs
60
Click PDF iconto download printer friendly file format of product specs.
Click to download a free copy of Adobe Acrobat Reader.
• Soundproofing Products • Sonex™ Ceiling & Wall Panels • Sound Control Curtains • Equipment Enclosures • Acoustical Baffles & Banners • Solid Wood & Veneer Acoustical Ceiling & Wall Systems • Professional Audio Acoustics • Vibration & Damping Control Fire Retardant Acoustics • Hearing Protection • Moisture & Impact Resistant Products • Floor Impact Noise Reduction • Sound Absorbers • Noise Barriers • Fabric Wrapped Wall Panels • Acoustical Foam (Egg Crate) Acoustical Sealants & Adhesives • Outdoor Noise Control • Assistive Listening Devices • OSHA, FDA, ADA Compliance• On-Site Acoustical Analysis • Acoustical Design & Consulting • Large Inventory • Fast Shipment • No Project too Large or Small • Major Credit Cards Accepted
Bolting is not necessary on most installations. When the equipment has a flush drain pan or tank on the bottom, mounts can be inverted as shown so the base plate provides support over a larger area.
