Measure & mark distance to top of panel

Measure & mark distance to one edge of panel

Mark the horizontal line with a level

Mark the vertical line with a level

Panel & Subfloor Adhesive & Spray Adhesive

“X-Plus” glue pattern
Apply Panel & Subfloor Adhesive in X-pattern
Apply Spray Adhesive in between Panel & Subfloor Adhesive lines
DO NOT Overspray Adhesive lines! Spray Adhesive must set for 4 minutes before mounting

Align panel edges to side vertical line & top horizontal line
Apply pressure on side & top to set edge adhesive
Apply pressure to set adhesive for remaining area

Adding Panels
Same glue pattern
Align edge side & top with installed panel
Apply pressure at adjoining side edge
Then apply pressure to remaining panel area
Also, apply pressure to smooth out seam area