Fabrisorb™ decorative fabric wrapped acoustic panels provide high-performance noise and reverberation reduction. From movie theaters to home music production studios, Fabrisorb™ ceiling and wall panels help you create a space that is both visually and acoustically pleasing. Some features that Fabrisorb™ offers are:
Find out more about how Fabrisorb™ wall and ceiling panels can be utilized on your next project.
Order these custom decorative panels from Acoustical Surfaces today!
Product Testing & Information
Product Spec SheetsInstallationCSI CAD REVITAcoustical TestsFire TestsMSDSMisc. DataProduct PhotosTestimonialsAccess All
6 lb. density glass fiber with woven fabric and micro-perforated vinyl facings.
Features
Fabric acoustic panels are custom designed and manufactured to meet every need. Soft or hard edges
Applications
These decorative sound absorbing panels are great for offices, schools, meeting rooms, music rooms, hotels, auditoriums, recording studios, broadcasting studios. These acoustic wall panels are perfect for any space where good speech privacy or speech intelligibility is important.
Thickness
1″, 1-1/8″, 2″, 2-1/8″
Size
Custom Fabric Wall Panels Up to 4′ × 10′
Edge Detail
Square, Radius, Bevel, Half-Bevel
Colors
Acoustical fabric and micro-perforated vinyl facings available in a wide range of standard and custom colors. For a full list of acoustical fabric options, visit our Fabric Selection Webpage!
One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another.
Install Location
Wall or Ceiling
Parts Included
(1) × Mounting Plate (factory-installed on the back of the panel)
(2) × 3″ Plastic Z-bars
(2) × Drywall Anchors
(4) × ¾″ Screws
Part Number
HWFWPHP1
Note
Plastic clips are also available in 21″, 47″, and 96″ lengths.
Fabric Wrapped Panel Rotofast Standard Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended.
Install Location
Wall
Parts Included
(1) × Rotofast standard anchor
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast standard hex tool
(1) Rotofast standard driver tool
Note
Multiple kits ordered together will only include (1) Rotofast standard hex tool and (1) Rotofast standard driver tool.
Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation.