 |
ADHESIVE MOUNTING
Panels are span plied with resin hardened spots on the
back. A 2” diameter dab of construction adhesive
is then applied to the spot and applied to the wall. Temporary
spanport is required to avoid slippage. |
 |
MAGNETIC FASTENERS
The magnetic fastener is applied to the panel before shipment.
Permanent spanport is required |
 |
HOOK AND LOOP FASTENERS
The loop side of the fastener is applied to the panel
at time of shipment. The hook side is attached to its
mate, and when installing, the tape backing is removed
and the panel is positioned on the wall. Permanent spanport
is required. |
 |
CONCEALED SPLINES
Panels with concealed spline attachment are provided with
kerfs along the edges of the panels. The spline then inserts
into one panel and is mounted onto the wall. Adjoining
panels are inserted into the remaining half of the spline. |
 |
MECHANICAL CLIPS
The panel clips are mounted onto the panels at the time
of shipment. The wall clips are installed on the wall
at the location established by the position of the panel
clips or wall bars. |
 |
IMPALING CLIP
The impaling clips are screwed directly to the wall with
the prongs extending outward. The glass fiber acoustical
panel is positioned and pressed firmly onto the clip.
Locking Adhesive is recommended with this clip mounting. |
