Archive

Soundproof Door Install

The Soundproof Door is a beautiful way to quiet a room. Here’s how to install it. First, the door is very heavy. Make sure you have enough people to safely position it. Once the door is in place, remove the bottom shipping plate. Then mark the four hinge positions on the hinge side of the […]

Standard Acoustic Panel Install

Measure & mark distance to top of panel Measure & mark distance to one edge of panel Mark the horizontal line with a level Mark the vertical line with a level Panel & Subfloor Adhesive & Spray Adhesive “X-Plus” glue pattern Apply Panel & Subfloor Adhesive in X-pattern Apply Spray Adhesive in between Panel & […]

Echo Eliminator Install

Measure & mark distance to top of panel Measure & mark distance to one edge of panel Mark the horizontal line with a level Mark the vertical line with a level Panel & Subfloor Adhesive & Spray Adhesive “X-Plus” glue pattern Apply Panel & Subfloor Adhesive in X-pattern Apply Spray Adhesive in between Panel & […]

Acoustic Panel Install

Acoustic panels will improve the sound of your room. To install a panel, you’ll need the included mounting kit, a drill, a level, a measuring tape, and painter’s tape. First, place the panel facedown on a clean work surface. Then attach the Z-Clips with screws to the metal plates on the back of the panel. […]

Acoustical Surfaces Wall Art Install

Insert Z-bar into picture frame inside channel Measure from frame top to Z-bar bottom Measure and mark for center of frame Measure and mark for top of frame Then mark for bottom of Z-bar (previous measurement) Mark the vertical center line with a level Mark level horizontal line at Z-bar bottom Place Z-bar on line, […]

Door Seal Kit Install

The Acoustic Geometry Door Seal Kit is a great way to start soundproofing a room Because it seals the air gaps around a solid core door. The key is accurately measuring the door frame before cutting the seals. First, measure the hinge side Door jamb from the threshold to the inside of the upper door […]

Envirocoustic Wood Wool Install

Wall Preparation: The previous wall surface has been removed, and ¾” deep by 4” high mounting strips have been installed horizontally at 23-3/4” vertical centers. 1” deep furring strips may be used if acoustic backing is needed. Begin by measuring 23-3/4” centers for the 2’x8’ (nominal) panels (actual size: 23-3/4”x95-1/2”) Then draw level lines on […]

Fabric-Wrapped Panel Install

Rotofast Snap-On Mounting System Measure and mark distance to side of panel Measure and mark distance to top of panel Mark horizontal line with a level Mark vertical line with a level Attach T-handle to orange snap anchors, place inside fabric corners, screw into panel until tight DO NOT over-tighten! Snap anchor collar should be […]

Poly Max Install

Method 1: Glue Mounting Measure & mark distance to center of two panel Measure & mark distance to top of panels Mark the vertical center line with a level Mark the top horizontal line with a level Panel & Subfloor Adhesive & Spray Adhesive “X-Plus” glue pattern Apply Panel & Subfloor Adhesive in X-pattern Apply […]