Tag Archive: soundproof apartment

  1. Quieting an Apartment

    Leave a Comment

    J.D. Writes:

    I found your email on the website and am hoping you can help! I live in an apartment that occupies the half of the bottom floor of an owner occupied home. The apartment is approximately 500sq ft and the home is about 4 years old. My bedroom is directly below my landlord’s and despite the six inches of concrete between our spaces, the ability for noise to travel from up to down is amazing. I can hear their bed squeak when they rollover in bed and even hear them fluff their comforter in the morning. The footfall noise is unbearable. I’m wondering what options there might be to create a buffer between my ceiling and their floor. They seem unwilling to purchase a rug or foam padding on their end, so is there a product that can be hung or attached to my ceiling

    Thanks so much for your help.

    Unfortunately, there is no easy way to get a soundproof apartment. Your problem is extremely common and incredibly difficult to help, even a little bit. I get probably 10 calls a week from people in a similar situation. 

    After I go through my whole explanation of how to fix the problem, I am asked something like “Can’t I just put up some acoustical foam panels? Won’t that help at least a little?” Unfortunately that’s not the case, and it can even make the problem worse.

    How to soundproof an apartment?

    Sound travels through the structure as a vibration. The sound is a wave of energy, and as it hits the structure it is turned into a vibration. That vibration makes its way through all of the hard surfaces that come in contact with each other and come out the other side as an airborne sound. Without decoupling (separating) the finished ceiling from the structure, the sound has an avenue to travel through. Even IF this is done, with ceilings like the problem you are experiencing, the walls still touch the ceiling which remains a hard surface transmission channel.

    how to soundproof apartment floor

    Acoustical foams and the like are designed to absorb echo, not to stop sound. They are typically light, fluffy products that are mostly air. If someone puts them up to try to stop sound from an adjacent space, it will make their space quieter. The quieter the ambient noise in a room, the easier it is to hear the sound coming in from another room. If you think of a library, it is so quiet in there that you can probably hear someone whispering to you from twenty-feet away.

    How to soundproof the apartment floor?

    The most effective way to stop floor-to-floor sound transmission is with an acoustical underlayment like our Acoustik recycled rubber tiles. These would glue to the subfloor while a new layer of exterior grade or marine grade plywood would be glued to the top of it. The finish floor would then be installed on top of the second layer of plywood just as it would normally. A lot of times, with occupied spaces, or even finished spaces, this isn’t possible. If it is, I would strongly recommend this approach because if the energy can be taken out of the structure at its source, it is MUCH less likely to be as loud below.

    how to soundproof apartment ceiling?

    How to soundproof the apartment ceiling?

    In order to fix (or even help) the problem, some construction will need to be done, and a lot of times, this isn’t possible when someone is renting an apartment. If one was to proceed, I would first suggest the RSIC-1 Resilient Sound Isolation clip system. This system creates a soundproof apartment ceiling by basically “floating” a new ceiling over an existing ceiling. This new floating ceiling must not touch any of the side walls, and the gap between the two should be filled with a non-hardening acoustical sealant. You can then go ahead and tape and mud the ceiling like normal and finish with paint. This system will drop your ceiling between 2″-2 ½”.

    You could also put a new layer of sheetrock and use a layer of Green Glue. This is a viscoelastic damper that is intended to be used between two layers of sheetrock.

    Other soundproofing options for a quiet living?

    You might want to try to use one of our SoundScreen white noise machines. Believe it or not, this will actually make your bedroom louder, rather than quieter. By increasing the ambient noise in the room, it will be harder for you to make out other sounds coming into the room. Try this, this is a little example that I came up with the other day.

    Go to your car. Turn the radio on the lowest setting possible so that you can hear the words of a song. Then turn on your car’s blower fan to heat the car or defrost the windows. Start with the fan on one. Turn it up, slowly all the way. Once the fan is blowing, then turn up the radio so that you can understand the words again. 

    soundproofing options

    Then turn the fan off, the music will seem MUCH louder than it needs to be, this is because of the

    difference in the ambient (background) noise. The radio had to be turned up so that it was audible OVER the background noise. By increasing the background noise in your apartment, it will be harder for your ears to pick up the sound that is bothering you now.

    The white noise theory might not help with severe impact noise or with bass from a sub-woofer, but it is the low-cost, easy approach that might at least help.

    How to soundproof a door?

    You can also limit sound from other exterior hallways by looking into options for a soundproof apartment door. While it won’t solve your issues with the people living above you, it can help limit frustrating noise coming into your apartment from the same level.

    I REALLY wish that I had better news because I would then be able to help a LOT more people. It is just very unfortunate that your problem is a difficult situation because of the limitations of the rental situation. If you would like me to walk you through these products over the phone, please feel free to contact me. I wish I had better news, but this is a difficult problem to fix, or really to even help.

  2. How to Soundproof an Apartment

    4 Comments

    Fotolia_25902468_Subscription_Monthly_M-600x401

    Tenants stay longer in apartments in which they are happy. As more and more people find themselves living in multi-family dwellings, a peaceful and quiet environment goes a long way towards making these tenants happy. Having happy tenants is just one reason to learn how to soundproof an apartment if you’re a building owner or landlord, and for apartment renters and owners themselves, less noise generally means a higher quality of life.

    Noise issues in apartment buildings can be from unit to unit, from the outside, or from the building itself due to the process of functioning. Preemptive treatment of noise is an investment that will return repeatedly by reducing time-consuming noise-related complaints and cutting down tenant turnover.

    Here’s how to soundproof an apartment, including several product recommendations depending on the type of apartment and noise issue:

    Flooring

    Flooring underlays such as the Acoustik™ impact reduction pad for floors goes directly under a tile or wood flooring surface and significantly reduces floor-to-floor noise while also having the added aesthetic benefit of reducing minor floor imperfections.

    Walls

    A great option for reducing noise between shared walls and from outside walls is the use CFAB™ Cellulose Panels. These panels can be put under drywall, left as-is, or painted – making them an easy and quick noise-reduction fix. Aside from controlling and reducing airborne noise and blocking noise from the outside, these panels are made from renewable and recycled fibers and are mold-resistant while also carrying a Class A fire rating.

    Sometimes there is a quick-fix for reducing noises between apartments that can work for building owners and tenants alike. A lack of effective caulking at the floor line behind the baseboards is one of the most common causes of sound transmission from one space to another and is easily checked by listening close to the baseboard. To see if this is the case, listen to see if noise is louder than at other parts of the wall. If it is, the easy and cheap solution is to simply remove the baseboard and caulk the space between the gypsum board and the flooring. For more information on this process read this article on Noise Control in Multi-Family Residential Buildings.

    Mechanical

    If you are wondering how to soundproof an apartment from its own mechanical noises, using pipe and duct lag will provide sound absorption and thermal insulation around all pipes and ductwork. Another option is to use Quiet Liner™ recycled cotton acoustical liner, which can also make your building more energy efficient by cutting down on heat loss and/or gain.

    These are just a few of the many ways we at Acoustical Surfaces, Inc. can help you reduce noise issues in an apartment building. Look through our website for more helpful articles and check out our soundproofing tips for even more ways to learn how to soundproof an apartment.