Click here to Download Material Safety Data Sheet (MSDS)
|
NOISE S.T.O.P.™
CONTACT ADHESIVE SPRAY |
| Professional Noise Control Products Wide Web Spray Adhesive |
| Heavy Duty Wide Web Spray Adhesive |
|
This wide web spray adhesive is one of the highest performance
aerosol adhesives available. For both temporary or permanent
bonding, this high solids product is ideal for uneven or porous
surfaces. Waterproof, flexible, transparent and non staining, use this
product for your toughest adhesive applications, including noise
control and pro audio applications made of foam, fabric, cotton,
fiberglass, polypropylene, leather, cardboard, most plastics and
many other materials. Not intended for use on vinyl.
Formulated
with the environment in mind, this product contains NO
CHLORINATED SOLVENTS OR OZONE DEPLETERS. Cleans
easily with Mineral Spirits.
Product Features:
• Wide Web Spray
• Temporary or Permanent Bond to Most Surfaces
• No Chlorinated Solvents
• No Ozone Depleters
• Waterproof, Flexible, Transparent and Non-staining
• Ideal for Uneven or Porous Surfaces or Weight Materials
• Use this product for your toughest adhesive applications
|
|
|
MATERIAL: Professional spray adhesive.
FEATURES: Very aggressive.
SIZE: 12 oz.
APPLICATIONS: Foam, wood, cardboard, paper, metal, cloth, plastic, fabrics, canvas, carpet, foils, photos, felt, leather, rubber,cork, glass, films, fiberglass, tissue paper, collages, ceramics, balsa wood, styrofoam, displays, photocomposition, layouts, trims, jute pads, kick pads, latex foams, polyurethane foams, styrene board, drywall, particle board, laminate, insulation, polyethylene film, PVC drywall trim, HVAC duct liner.
FLAMMABILITY: Flammable
V.O.C. CONTENT: 54.9%
HMIS RATING: Health = 2, Flammability = 3, Reactivity = 0, Personal Protection = B
DIRECTIONS:
Always shake well before using. Never aim valve at face. Hold can
upright and apply adhesive in a side-to-side motion 10 to 14 inches
from surface.
TEMPORARY BONDS: Spray one surface, allow to tack and apply
material to be bonded.
PERMANENT BONDS: Liberally spray both surface and material,
allow to tack, then apply.
CLEANING SPRAY TIP: When finished with a particular spray
application, always turn can upside down and spray for two
seconds to clear valve and prevent clogging. If adhesive
accumulates around nozzle, wipe clear while wet. If dried in valve
opening, remove with degreasing solvent.
DANGER:
Contains Acetone and Hexane. Extremely Flammable. Use with
adequate ventilation. Keep away from heat, sparks, open flame or
other ignition sources. Harmful or fatal if swallowed. Do not take
internally. If swallowed, do not induce vomiting. Contact a
physician immediately. Vapor harmful. Avoid inhalation of spray mist
or vapors. If overcome, move patient to fresh air. Call a physician
immediately. Eye irritant. Avoid contact with eyes and skin. In case
of eye contact, flush immediately with water and continue for 15
minutes. If irritation persists, see a physician. For skin contact, wash
with soap and water. If irritation persists, call a physician
immediately. Contents under pressure. Do not puncture or
incinerate container. Do not store at temperatures above 120°F.
KEEP OUT OF REACH OF CHILDREN.
CAS NUMBERS: Isobutane/Propane Blend. |
